Parex Monoblanco – 25kg

Monoblanco is a bright white, semi lightweight, one coat, weather resistant and breathable render for vertical masonry and concrete walls. MONOBLANCO is a bright white version of MONOREX GF.

Colours

Monoblanco is a bright white finish

Suitable Substrate

Masonry and walls conforming to BS 5628-3 and constructed from the following:

• Ultra-lightweight, lightweight & dense aggregate concrete blocks(1).
• Bricks.
• Clay blocks e.g. Porotherm(1)
• Standard low and normal density lightweight aircrete blocks.
• Breeze blocks (clinker)(1).
• Stone/rubble stone.
• Shuttered concrete(1).
• Expanded clay insulation blocks(1).
• Clean, sound, well adhered existing render.
• Base coats conforming to BS EN 13914-1
• PAREX grey weather resistant base coats, e.g. MONOGRIS E, PARMUREX or TRADIREX.
• Dry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocks. Durisol with MONOREX GM is NHBC approved for single skin external wall construction.
• For below dpc applications and old substrates in accordance with BS8000 – 4 Code of Practice for Waterproofing, consult Parex.

(1) These substrates will require a suction control coat of MICRO GOBETIS 3000

Substrate Primer

Micro Gobetis 3000 (Dependent on substrate – see clause (1) above)

Coverage

Coverage is provided as a guidance only, excludes wastage and will vary subject to substrate conditions and thickness applied.

Weatherproofing Scraped Finish Coat @ 15mm = 1.0-1.1 m² per 25kg bag
Decorative Coat Scraped Finish on to Sika Base Coat @ 10mm = 1.4-1.6 m² per 25kg bag

For additional information refer to the data sheet on Textured Mineral Finishes.

Finishes

• • Fine Scraped
  • Spray Textured – from tyrolean style to heavy roughcast effect.
  • Trowel Smoothed
  • Sponge or float smoothed

For additional information refer to the data sheet on Textured Mineral Finishes.

Packaging

Monoblanco Render is supplied in 25kg bags.

Technical & Safety Datasheets

Please follow link to Parex Monoblanco technical datasheet.

Delivery