Setcrete Acrylic Primer – 2.5ltr

Setcrete™ Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.

Suitable Substrate

Setcrete™ Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.

Coverage

• Applied dilute to absorbent : 50m2
• Applied undiluted to non-absorbent : 25m2

Rates will vary based on the condition of the subfloor.

Properties

General purpose for both Absorbant & Non-Absorant Surfaces, Great Adhesion for Levelling Compounds, Coloured for Coverage Control.
Drying Times – This will vary depending on temperature, humidity and absorbency of the subfloor.

From 20–30 minutes at 20°C on absorbent subfloors.
From 60 minutes at 20°C on non-absorbent subfloors.

These times will be extended at lower temperatures.

Packaging

Setcrete™ Acrylic Primer is supplied in 2.5ltr tubs.

Technical & Safety Datasheets

Please follow link to Setcrete™ Acrylic Primer technical datasheet.
Please follow link to Setcrete™ Acrylic Primer safety datasheet.
Please follow link to Setcrete™ Acrylic Primer declaration of performance

Delivery